Shaping the future of caulking tools!

Newborn
Newborn has been providing quality sealant and adhesive dispensers and accessories since 1974. Our mission is simple: To provide innovative products engineered to last and that make dispensing and applying sealants and adhesives easier.
 
We accomplish our mission by continuously listening to the feedback of everyone including end-users, distributors and manufacturers in multiple industries such as waterproofing, restoration, concrete repair, painting, hardware, glazing, automotive, aerospace, military, solid surface, firestop, DIY… the list goes on.
 
It is our desire to solve any issues, seen or unseen, based on this feedback as well as our expertise and knowledge. We work passionately to be the leader in innovation and improvements to dispensing technology and to provide only the best quality that will guarantee to keep you at the forefront of your respective industry.
 
Newborn “Shaping the Future of Caulking Tools”

   – SINGLE COMPONENT –

MODEL 012-DC
Round rod cradle frame

3:1 Thrust

Non-drip

10 oz. 

MODELS 77 / 035
Ratchet rod cradle frame
6:1 Thrust
77: 10 oz. 
035: 29 oz. 
MODELS 101 / 105
Smooth rod cradle frame
10:1 Thrust
Ladder hook
101: 10 oz. 
105: 29 oz. 

Includes: Seal puncture tool/spout cutter (model 105 only)

MODEL 102D-CB
Drip-free hex rod cradle frame

10:1 Thrust

Caulk buddy™ finishing tool w/caps, seal puncture tool/spout cutter, ladder hook, welded backcap

10 oz. 

MODEL 109D
Drip-free hex rod parallel frame

5:1 Thrust

Lightweight nylon fiberglass, seal puncture tool/spout cutter, ladder hook

10 oz. 

MODELS 111-CB / 125
Hex rod parallel frame

10:1 Thrust

Seal puncture tool/spout cutter, ladder hook, E-Z load front cap

111-CB: 10 oz. 

Includes: Caulk Buddy™ finishing tool w/caps

125: 29 oz. 
MODEL 112D-CB
Drip-free hex rod parallel frame

10:1 Thrust

Patented Caulk buddy™ finishing tool w/caps, seal puncture tool/spout cutter, ladder hook, E-Z load front cap

10 oz.

MODEL 114D
Dripless on demand hex rod parallel frame

10:1-7:1 Adjustable thrust

Seal puncture tool/spout cutter, ladder hook, E-Z load front cap

10 oz.

MODEL 115D
Non-drip hex rod parallel frame

7:1 Thrust

Heat treated rod & friction plate, eliminate scoring seal puncture tool, ladder hook, extra thick front cap, push disk fastened with heavy duty locknut

10 oz. 

MODELS 188 / 215
Ratchet rod cradle frame

6:1 Thrust

Finger gard, seal puncture tool/spout cutter, ladder hook, extra deep ratchet teeth, welded backcap

188: 10 oz. 

215: 29 oz. 

MODELS 189D / 217D
Drip-free super ratchet rod cradle frame

6:1 Thrust

Finger gard, seal puncture tool/spout cutter, ladder hook, extra deep ratchet teeth, welded backcap

189D: 10 oz.

217D: 29 oz.

   – SINGLE COMPONENT / LITE SERIE –

MODEL  U-LITE
Non-drip smooth rod frameless

10:1 Thrust

Lightweight & compact design, seal puncture tool/spout cutter, ladder hook, quick & easy snap in/pop out cartridge loading & unloading, ergonomic grip

10 oz. 

MODEL  X-LITE
Barrel rotates freely, non-drip mechanism,no mess on handle

12:1 Thrust

Seal puncture tool/spout cutter, ladder hook, handle with rubber pad for extra comfort, finishing tool Caulk buddy™ with cap

10 oz.

 

MODEL  Z-LITE
Lightweight, rod free caulking gun

10:1 Thrust

Compact design, get into hard to reach places, flexible steel strap plunger, belt hook

10 oz. 

 

   – SINGLE COMPONENT / HYBRIDTECH –

MODEL 211-HTS
Hex rod parallel frame

10:1 Thrust

Rigid steel frame with patent pending locking mechanism, specially designed composite ergonomic trigger, zinc chromate plated, seal puncture tool/spout cutter, ladder hook, E-Z loadfront cap

10 oz.

MODEL 212-HTD
Drip-free hex rod parallel frame

10:1 Thrust

Rigid steel frame with patent pending locking mechanism, specially designed composite ergonomic trigger, seal puncture tool/spout cutter, ladder hook, E-Z load front cap

10 oz.

MODEL 288-HTR
Ratchet rod parallel frame

6:1 Thrust

Rigid steel frame with patent pending locking mechanism, specially designed composite ergonomic trigger, heat treated teeth, seal puncture tool/spout cutter, ladder hook, E-Z load front cap

10 oz.

   – SINGLE COMPONENT / ZINC CHROMATE –

MODEL 301
Hex rod cradle frame

12:1 Thrust

Seal puncture tool/spout cutter, ladder hook, wrist strap, welded backcap, zinc chromate plated

10 oz.

MODELS 307 / 315
Ratchet rod cradle frame

6:1 Thrust

Finger guard, seal puncture tool/spout cutter, ladder hook, heat treated teeth, wrist strap, zinc chromate plated

307: 10 oz.

315: 29 oz.

MODEL 330
Hex rod parallel frame

12:1 Thrust

Seal puncture tool/spout cutter, ladder hook, heat treated teeth, zinc chromate plated

10 oz.

 

   – SINGLE COMPONENT / GATOR TRIGGER

MODELS 910-GTR / 915-GTR
Super ratchet rod cradle frame

6:1 Thrust

Gator trigger™  comfort grip, seal puncture tool/spout cutter, ladder hook, heat treated teeth, welded backcap

910-GTR: 10 oz.

915-GTR: 29 oz.

MODEL 920-GTS
Hex rod parallel frame

10:1 Thrust

Gator trigger™  comfort grip, seal puncture tool/spout cutter, ladder hook, E-Z loadfront cap

10 oz.

 

MODEL 930-GTD
Drip-free hex rod cradle frame

10:1 Thrust

Patented Gator trigger™ comfort grip, seal puncture tool/spout cutter, ladder hook, welded backcap

10 oz.

 

MODEL 940-GTD
Drip-free hex rod parallel frame

10:1 Thrust

Patented Gator trigger™ comfort grip, seal puncture tool/spout cutter, ladder hook, E-Z loadfront cap

10 oz.

MODEL 950-GTS
Hex rod cradle frame

12:1 Thrust

Patented Gator trigger™ comfort grip, seal puncture tool/spout cutter, ladder hook, welded backcap, zinc chromate plated

10 oz.

MODEL 960-GTR
Super ratchet rod cradle frame

6:1 Thrust

Patented  Gator trigger™ comfort grip, seal puncture tool/spout cutter, ladder hook, heat treated teeth, welded backcap, zinc chromate plated

10 oz.

MODEL 980-GTD
Dripless on demand hex rod revolving frame

12:1-6:1 Adjustable thrust

Patented Gator trigger™ comfort grip, seal puncture tool/spout cutter, ladder hook, revolving frame with rotation lock, zinc chromate plated

10 oz.

   – SINGLE COMPONENT / HIGH THRUST –

MODEL 150
Round rod revolving frame

12:1 Thrust

Zinc chromate plated, heat treated rod, ladder hook, precision sintered friction plate

10 oz.

MODELS 250 / 255
Super smooth rod revolving frame

18:1 Thrust

Zinc chromate plated, precision sintered friction plate, easy release star-burst reverse punched gripping plate, heat treated rod, extra durable parts, seal puncture tool/spout cutter, ladder hook

250: 10 oz.

255: 29 oz.

MODEL 290, ELITE SERIE
Metal frame with plastic housing over front cap and trigger components

22:1 Thrust

Seal puncture tool, plastic cover over ladder hook and thumb release, two component trigger and handle grip, heat-treated rod, single-piece sintered friction plate

10 oz.

MODEL 301-XSP
Hex rod cradle frame

26:1 Thrust

Patented Gator trigger™ comfort grip, seal puncture tool/spout cutter, ladder hook, welded backcap

10 oz.

MODEL 373-XSP
Super smooth rod revolving frame

26:1 Thrust

Zinc alloy handle w/rubber coated comfort grip, heat treated rod, extra durable parts, seal puncture tool, ladder hook

10 oz.

MODEL 375-XSP
Super smooth rod revolving frame

26:1 Thrust

Hammer finish alloy handle w/rubber coated comfort grip, precision sintered friction plate, easy release star-burst reverse-punched gripping plate, heat treated rod, extra durable parts, ladder hook

10 oz.

   – BULK / SAUSAGE –

MODELS 224 / 232
Square rod, steel barrel

7:1 Thrust

Leather cups/floating sausage cup, ring cap, 3 cones and OV-25 (1/2″) nozzle, bell washer (metal conical ejector), leather cup spreaders (2), replacement parts available, optional carrying case available (see page 21 of our catalog)

224: 24 oz. bulk; 10 oz. & 20 oz. sausage

232: 32 oz. bulk; 10 oz. 20 oz. & 30 oz. sausage

MODELS 224 / 232- LITE
Square rod, aluminium barrel

7:1 Thrust

Leather cups/floating sausage cup, ring cap, 3 cones and OV-25 (1/2″) nozzle, bell washer (metal conical ejector), leather cup spreaders (2), replacement parts available, optional carrying case available see page 21 of our catalog )

224-LITE: 24 oz. bulk; 10 oz. & 20 oz. sausage

232-LITE: 32 oz. bulk; 10 oz, 20 oz et 30 oz. sausage

MODELS 316 / 324 / 332
Standard hex rod, steel barrel

12:1 Thrust

Ring cap & 3 cones, replacement parts available, optional carrying case available (see page 21 of our catalog)

316: 16 oz. bulk; 10 oz. sausage 8-1/2″ & 10″ cartridge – Multi chemical resistant twin Hytrel cup (leather cups optional); OV-21 (3/8″) nozzle included.

324: 24 oz. bulk; 10 oz. & 20 oz. sausage 8-1/2″ & 10″ cartridge – Leather cups with floating sausage cup, OV-25 (1/2″) oval nozzle included.

332: 32 oz. bulk; 10 oz., 20 oz. & 30 oz. sausage 8-1/2″ & 10″ cartridge – Leather cups with floating sausage cup. OV-25 (1/2″) oval nozzle included.

MODEL 416
Ratchet rod, steel barrel

6:1 Thrust

Multi-chemical resistant twin Hytrel cup (leather cups optional), ring cap and 3 cones, chamfered barrel ends for easy cup installations, wrist strap, replacement parts available, optional carrying case available ( see page 21 of our catalog)

16 oz. bulk; 10 oz. sausage 8-1/2″ & 10″ cartridge – OV-21 (3/8″) oval nozzle included.

MODEL 424
Ratchet rod, steel barrel

6:1 Thrust

Multi-chemical resistant twin Hytrel cup (leather cups optional), ring cap and 3 cones, chamfered barrel ends for easy cup installations, wrist strap, replacement parts available, optional carrying case available (see page 21 of our catalog)

24 oz. bulk; 10 oz. & 20 oz. sausage 8-1/2″ & 10″ cartridge – OV-25 (1/2″) oval nozzle included.

MODEL 490-GTR
Ratchet rod, aluminium barrel

6:1 Thrust

88 oz. capacity, great for large jobs, lightweight yet heavy duty aluminium barrel, extra deep ratchet teeth, patented Gator Trigger™ comfort grip, replacement parts available.

88 oz. 

MODEL 532
Tuck point/grout dispenser

12:1 Thrust

Zinc alloy handle, precision sintered friction plate, revolving barrel to go around corners.

Includes: 1 tuck point nozzle, 1 grout nozzle, 1 tube.

32 oz. 

MODELS 624-GTS / 632-GTS
Deluxe hex rod, steel barrel

14:1-7:1 Adjustable thrust

Patented Gator Trigger™ comfort grip, rotating barrel with lock, heated treated rod, ring cap & 3 cones included, OV-25 (1/2″) oval nozzle included, leather cups standard with floating sausage cup, replacement part available, optional carrying case available (see page 21 of our catalog).

624-GTS: 24 oz. bulk; 10 oz. & 20 oz. sausage 8-1/2″ & 10″ cartridge

632-GTS: 32 oz. bulk; 10 oz. 20 oz. & 30 oz. sausage 8-1/2″ & 10″ cartridge

MODELS 610Al / 620Al / 634 AL
Smooth rod, aluminium barrel

12:1 Thrust

Zinc alloy handle, sausage cup only, multi-chemical resistant twin Hytrel cup bulk-sausage, bulk-sausage conical ejector, heat treated rod, precision sintered friction plate, easy release star-burst reverse-punched gripping plate, (3) pc-620 cones , optional carrying case available (see page 21 of our catalog)

610AL: 10 oz. bulk; 10 oz. sausage 8-1/2″ & 10″ cartridge 

620AL: 24 oz. bulk; 10 oz. & 20 oz. sausage 8-1/2″ & 10″ cartridge 

634AL: 34 oz. bulk; 10 oz., 20 oz. & 30 oz. sausage 8-1/2″ & 10″ cartridge 

Model 620AL is available in these colors and patterns at the time of printing. Please call for current options. Custom designs and private labels are available.

NOIR
NEON
ORANGE
RED
GREEN
BLUE
FLAME
CAMO
STORM
BLUE CAMO
BLUE FLAME
MODEL 820AL ELITE
Ratchet rod, aluminium barrel

22:1 Thrust

Aluminum front and back caps, dual-component rubber grip, heat-treated rod, single-piece sintered friction plate, protective trigger housing, ladder hook, (3) PC-620 cones, sausage-only piston seal (SC-81), conical ejector (CI-90), LC-4: 3-1/2″ Leather cup*, 2″ Hytrel® dual piston seal (DC-81) included

24 oz.  bulk; 10 oz. & 20 oz. sausage 8-1/2″ & 10″ cartridge

MODELS 824-NSS / 832-NSS  NON-STICK SERIES
Deluxe revolving barrel, hex rod

14:1-7:1 Adjustable thrust

Non-stick coating for easy cleaning, patented Gator Trigger™ comfort grip , revolving barrel with lock, heat treated rod, ring & 3 cone cap included, oval OV-25 (1/82″) nozzle, standard leather piston seal with floating sausage piston seal, dual Hytrel piston seal resistant to many chemicals ,spare parts available

824-NSS: 24 oz. bulk; 10 oz. & 20 oz. sausage 8-1/2″ & 10″ cartridge

832-NSS: 32 oz. bulk; 10 oz. 20 oz. & 30 oz. sausage 8-1/2″ & 10″ cartridge

MODELS 924 / 932
Lightweight aluminium revolving barrel, smooth rod, quick-change, high thrust

26:1 Thrust

Rubber handle, heat-treated rod, multi-chemical resistant hytrel double piston seal, precision sintered friction plate, easy-release star-punched gripping plate, conical ejector for bulk/sausage – less waste, push disc for use with cartridge, (3) nozzles (PC-62) included

24 oz. bulk; 10 oz. & 20 oz. sausage 8-1/2″ & 10″ cartridge

   – DUAL COMPONENT –

MODEL DR100N
Variable ratio applicator

26:1 Thrust

For use with 200 ml dual epoxy cartridge, Easy converts in just seconds to mix ratios of 1:1 and 2:1 with snap in/snap out push disks, patented cartridge stabilizing plate for extra support, precision sintered friction plate, easy release star-burst reverse-punched gripping plate, hammer finished alloy handle

MODEL DR100VT
Dedicated ratio applicator

18:1 Thrust

For use with 6 oz. dual epoxy cartridge, semi-cradle frame for extra cartridge support, precision sintered friction plate, easy release star-burst reverse-punched gripping plate, zinc alloy handle

MODELS VR-200-XSP / VR400-XSP
Variable ratio applicator

26:1 Thrust

Easily converts in just second to mix ratios of 1:1, 2:1, 4:1 & 10:1 with snap in/snap out push disk, extra durable heat treated rod, precision sintered friction plate, easy release star-burst reverse-punched gripping plate, hammer finished alloy handle w/rubber coated comfort grip

VR-200-XSP: For use with 200 ml cartridge.


VR-400-XSP: For use with 200 ml & 400 ml cartridge.

MODEL DR200-DF
Dedicated ratio applicator

18:1 Thrust

For use with 210 ml – 10:1 mix ratio dual epoxy cartridge, innovative drip-free mechanism, prevents excess material flow, 3 side bar design for durability for cartridge position and support, hammer finished alloy handle w/rubber coated comfort grip

MODEL 435-XSP
Multi ratio applicator

26:1 Thrust

Patented cartridge stabilizing plate for extra cartridge support, extra durable heat treated piston rod, easy release star-burst reverse-punched gripping plate, hammer finished alloy handle

300 ml x 300 ml; 300 ml x 150 ml

MODEL 510
Multi ratio applicator

10:1 Thrust

Easily converts in just seconds with snap in/snap out push disks, static mixer cutter, instant pressure release bar

150 ml x 150 ml; 150 ml x 75 ml; 75 ml x 75 ml

MODEL 515-SP
Multi ratio applicator

20:1 Thrust

Easily converts in just seconds with snap in/snap out push disks, static mixer cutter, instant pressure release bar

300 ml x 300 ml; 300 ml x 150 ml; 150 ml x 150 ml

MODELS 520 / 530
Multi ratio applicator

18:1 Thrust

Easily converts in just seconds with snap in/snap out push disks, patented cartridge stabilizing plate for extra cartridge support, extra durable heat treated piston rod, precision sintered friction plate, easy release star-burst reverse-punched gripping plate, zinc alloy handle

520: 150 ml x 150 ml; 150 ml x 75 ml; 75 ml x 75 ml

530: 300 ml x 300 ml; 300 ml x 150 ml; 150 ml x 150 ml; 150 ml x 75 ml

MODEL 535-XSP
Multi ratio applicator

26:1 Thrust

Easily converts in just seconds with snap in/snap out push disks, patented cartridge stabilizing plate for extra cartridge support, extra durable heat treated piston rod, precision sintered friction plate, hammer finished alloy handle w/rubber coated comfort grip

300 ml x 300 ml; 300 ml x 150 ml; 300 ml x 75 ml; 150 ml x 150 ml; 150 ml x 75 ml

MODEL 655-XSP
Multi ratio applicator 

26:1 Thrust

Easily converts in just seconds to mix ratios of 1:1 & 2:1 with snap in/snap out push disks, patented cartridge stabilizing plate for extra support, extra durable, heat treated piston rod, precision sintered friction plate, easy release star-burst reverse-punched gripping plate, hammer finished alloy handle w/rubber coated comfort grip

600 ml x 600 ml; 600 ml x 300 ml

MODELS 750-XSP / 751-XSP
Multi ratio applicator

26:1 Thrust

Extra durable, heat treated piston rod, precision sintered friction plate, easy release star-burst reverse-punched gripping plate, hammer finished alloy handle w/rubber coated comfort grip

750-XSP: 750 ml x 75 ml

751-XSP: 750 ml x 150 ml; 750 ml x 100 ml

MODEL 755-XSP
Multi ratio applicator

18:1 Thrust

Easily converts in just seconds with snap in/snap out push disks, patented cartridge stabilizing plate for extra support, extra durable heat treated piston rod, precision sintered friction plate, easy release star-burst reverse-punched gripping plate, zinc alloy handle w/rubber coated comfort grip

750 ml x 750 ml; 750 ml x 300 ml

   – PNEUMATIC MODELS –

NEWBORN innovative 710AL pneumatic system allows the user to extrude materials from 10 oz. and 29 oz. cartridges and/or 10 oz. or 20 oz. sausage packs by simply changing barrels. Purchase a complete unit containing the universal handle and all three barrels or purchase a universal handle and add the additional barrels as you need them.

MODEL  710AL SERIES
Single component pneumatic

120 lb. PSI

Air pressure regulator, lightweight quick change aluminium barrel, auto release shut off valves, safety valve in the handle, quick disconnect nipple

710AL-12: 10 oz. cartridge

710AL-20: 10 oz. / 20 oz.  sausage

710AL-30: 29 oz. cartridge

MODELS 725AL-12 / 725AL-30
Rod driven cartridge pneumatic

Nominal thrust 490 lbs., 100 PSI, 2.5″ cylinder

Extra power for viscous materials, ideal for universal cartridge systems, true air regulator controls flow, lightweight quick change aluminium barrel, safety valve in the handle, air dump calve stops flow instantly, reverse air, quick disconnect nipple

725AL-12: 10 oz. cartridge

725AL-30: 29 oz. cartridge

   – DUAL COMPONENT PNEUMATICS À DEUX COMPOSANTS –

MODELS 724 / 732
Bulk/sausage pneumatic

100 PSI

Leather cups standard with floating sausage cup, air pressure regulator, OV-25 oval nozzle (1/2″), ring cap and 3 cones included, auto release shut off valve

724: 24 oz. Bulk; 10 oz., 20 oz. & 30 oz. sausage

732: 32 oz. Bulk; 10 oz. & 20 oz. sausage

MODELS 830A15 / 830A30
Multi ratio pneumatic applicator

Nominal thrust 490 lbs., 100 PSI/2,5″ cylinder

Easily converts in just a seconds with snap in/snap out push disks, patented cartridge stabilizing plate for extra cartridge support, adjustable heavy duty aluminium air regulator, air dump valve stops flow instantly, reverse air, quick disconnect nipple

830A15: 150 ml x 150 ml; 150 ml x 75 ml; 75 ml x 75 ml

830A30: 300 ml x 300 ml; 300 ml x 150 ml; 300 ml x 75 ml; 150 ml x 150 ml; 150 ml x 75 ml

MODELS 850A30 / 850A75
Multi ratio pneumatic applicator

Nominal thrust 1,100 lbs., 100 PSI/4″ cylinder

Easily converts in juste a seconds with snap in/snap out push disks, patented cartridge stabilizing plate for extra cartridge support, adjustable heavy duty aluminium air regulator, air dump valve stops flow instantly, reverse air, quick disconnect nipple

850A30: 300 ml x 300 ml; 300 ml x 150 ml; 300 ml x 75 ml; 150 ml x 150 ml

850A75: 750 ml x 750 ml; 750 ml x 300 ml; 750 ml x 75 ml; 600 ml x 600 ml; 600 ml x 300 ml; 300 ml x 300 ml; 300 ml x 75 ml

MODEL 860A75
Multi ratio Combo Trigger pneumatic applicator

Nominal thrust 1,100 lbs., 100 PSI/4″ cylinder

No conversions needed to go from horizontal suitcase grip to vertical pistol grip, innovative rotatable trigger switch & valves allow for your preferred dominant trigger grip orientation, easily converts in just a seconds with snap in/sanp out push disks, patented cartridge stabilizing plate for extra cartridge support, adjustable heavy duty aluminium air regulator, air dump valve stops flow instantly, reverse air, quick disconnest nipple

750 ml x 750 ml; 750 ml x 300 ml; 750 ml x 75 ml; 600 ml x 600 ml; 600 ml x 300 ml; 300 ml x 300 ml; 300 ml x 75 ml

MODEL VR200A83
Variable ratio pneumatic applicator

Nominal thrust 490 lbs. 100 PSI/2,5″ cylinder

For use with 200 ml cartridges, easily converts in just a secons to (1:1, 2:1, 4:1 and 10:1 mix ratios) with snap in/snap out push disks, slide in/side load, adjustable heavy duty aluminium air regulator, air dump valve stops flow instantly, reverse air, quick disconnect nipple, all size push disks included

200 ml cartridges

MODEL VR400A83
Variable ratio pneumatic applicator

Nominal thrust 490 lbs. 100 PSI/2,5″ cylinder

For use with 200 ml and 400 ml cartridges, easily converts in just a seconds to (1:1, 2:1, 4:1 and 10:1 mix ratios) with snap in/snap out push disks, slide in/side load, adjustable heavy duty aluminium air regulator, air dump valve stops flow instantly, reverse air, quick disconnect nipple, all size push disks included

200 ml & 400 ml cartridges

MODEL VR400A85
Variable ratio pneumatic applicator

Nominal thrust 1,100 lbs. 100 PSI/4″ cylinder

For use with 200 ml & 400 ml cartridges, easily converts in just a seconds to (1:1, 2:1, 4:1 & 10:1 mix ratios) with snap in/snap out push disks, slide in/side load, adjustable heavy duty aluminium air regulator, air dump valve stops flow instantly, reverse air, quick disconnect nipple, all size push disks included

200 ml & 400 ml cartridge

EPOXY APPLICATOR ACCESSORIES

   – SPECIALTY MODELS –

MODEL 408N
Veterinary ratchet type epoxy poly gel gun

6:1 Thrust, 2-1/2 oz., 6 oz., 8 oz., 10 oz. (300 cc), 12 oz.

For three lug tubes: 1-5/8″ dia. x 300 ccc (and others), adjustable dosage = 5cc, 10 cc, 15 cc, heat treated teeth

MODEL 377
Deluxe X-TENDER  smooth rod

10:1 Thrust

45″ caulker for sub-floors, ceiling, roof, reversible 2-in-1 joist guide

29 oz. cartridge, with optional adapter allows use of 10 oz. cartridge

X-TENDER ACCESSORIES

BRP-10: Barrel adapter to modify the X-TENDER to use with 10 oz. cartridges

JG-2: Joist guide, fits 2″ & 4″

CG-1: Concrete guide, fills expansion joints fast & easy

SW-1: Surface wheels for easy pushing or pulling the X-TENDER

MODELS 253 / 256 / 257 / 259
Super smooth rod with retainer

18:1 Thrust

Easy release star-punched gripping plate, zinc alloy handle and trigger, ladder hook, precision sintered friction plate, spare parts available

253: 2.5 oz.; 9 lbs.
256: 6 oz.; 10 lbs.
257: 8 oz.; 13 lbs.
259: 12 oz.; 15 lbs.

MODELS 710AL – 03 – 06 – 07 – 09
Pneumatic cartridge with retaining device

100 lb. PSI

auto release shut-off valves, air pressure regulator, lightweight aluminum quick change barrel, quick disconnect nipple

710AL-03: 2.5 oz.; 2 lbs.
710AL-06: 6 oz.; 3 lbs.
710AL-07: 8 oz.; 3 lbs.
710AL-12: 12 oz.; 3 lbs.

   – ACCESSORIES –

BeadBuddy45™: BB-45

Nozzle system for hard-to-reach places. Extended, 45° angle and standard. For bulk – sausage  applicators.

BeadBuddy45™: BG-45

Nozzle system for hard-to-reach places. Extended, 45° angle and standard. For bulk – sausage applicators.

BUCKET SCRAPER

SCR-02: 2″

SCR-03: 2.1/2″

NITRILE GLOVES

Latex free and chemmical resistant.

Sizes: L, XL, XXL.

KIT

Contains individual model with all accessories normally included with that particular model. Plastic case (with section for various accessories)

Contains: Set of 6 spatulas on O-ring (Slick-1), extruded aluminium ladder hook(LH35A or LH36A), (LK-9) flat handle knife, a pack of 10 UB standard utility blades.

KIT MODEL
KIT-224 224
KIT-232 232
KIT-224-LITE 224-LITE
KIT-232-LITE 232-LITE
KIT-324 324
KIT-332 332
KIT-424 424
KIT-620 620AL
KIT-624 624-GTS
KIT-632 632-GTS
RING CAP

RCP-60: 2″

For PC-58

FRONT CAP

FCS-67: 2″

FCS-68: 2.5/8″

FRONT CAP

FCS-620AL: 2″

For 620AL

FOLLOW PLATES

FPT-02: 2 gal.

FPT-05: 5 gal.

Neoprene seal can be use with straight and tapered pails.

  • For 2″ diameter barrels
  • No threaded barrel docking (air tight-o-ring)
  • 5 gal. – 11.5″ diameter w/1″ seal
  • 2 gal. – 8.5″ diameter w/ 1/2″ seal
CONES PC-58:

To be used with 2″ barrel bulk guns and RCP-60 ring.

CONES PC-62:

To be used with 620AL series.

CONES PC-620:

To be used with 620AL series.

CONES PC-620 BENT:

To be used with 620AL series.

PC-PUNCTURESM:

Small/thin version, self-puncturing nozzle to be used with sausage models

PK-FlexNozzle:

Small/thin version, self-puncturing nozzle to be used with sausage models

CAULK BUDDY™

Finishing tool for creating a perfect casting, with flexible rubber tip that clips onto the gun. Includes 2 plugs to keep open caulking fresh.

BACKER ROD ROLLER

SK-BR1

  • No changing wheels
  • No adjustements
  • Lightweight aluminium handle
  • Simple 3 pieces assembly
  • Non-marking plastic wheel

LADDER HOOKS

LH-32: To be used with 200, 300, 400 & 600 series bulk gun.

LADDER HOOKS

LH-35A: To be used with 600 and 900 series sausage models and 900 series bulk gun models.

LADDER HOOKS

LH-36A: For use with 300, 400, 600 & 800 series bulk models.

MIXER

MX-01: Turbo mixer

MIXERS

MX-02: 4″ catalyst mixer, 22″ tall

MX-03:  4″ catalyst mixer, 28″ 

RAZOR BLADE SCRAPER
RZSCR

PK-ASB: Heavy duty angled blade

PK-SB: Serrated blade

PK-LUB: Long utility blade

PK-UB: Utility blade

VIBRATING KNIFE BLADES
VKBL- Pointed
VKBS- Rectangle

FLAT HANDLE KNIFE

PK-LK9: 9″

PK-LK14: 14″

PK-LK18: 18″

PK-LK24: 24″

STEEL KNIFE

PK-SLK9: 9″

PK-SLK14: 14″

PK-SLK18: 18″

PK-SLK24: 24″

THE ORIGINAL PIPEKNIFE®

PK-PK14: 14″

PK-PK18: 18″

PRESTO PIPEKNIFE®

Quick change blade system

PK-PRESTO9: 9″

PK-PRESTO14: 14″

PK-PRESTO18: 18″

PK-PRESTO24: 24″

BEVEL END NOZZLE

(3″ long)

OV-17: 3/16″ ID X 5/8″ OD

OV-18: 1/4″ ID X 5/8″ OD

OV-21: 3/8″ ID X 5/8″ OD

OV-25: 1/2″ ID X 5/8″ OD

OV-27: 5/8″ ID X 5/8″ OD

SQUARE END NOZZLE

SQ-49: 1/8″ ID X 3/8″ L

(3/8″ OD X 3″ L)

SQ-50: 1/8″ ID X 3/8″ L

(1/2″ OD X 3″ L)

SQ-51: 1/8″ ID X 7/8″ L

(5/8″ OD X 3″ L)

ROUND END NOZZLE

R-9: 1/8″ ID X 3/8″ OD X 4″ L

R-10: 3/32″ ID X 5/8″ OD X 4″ L

R-11: 1/8″ ID X 5/8″ OD X 4″ L

R-12 Bent: 1/8″ ID X 3/8″ OD X 5″ L

R-16 Bent: 1/8″ID X 3/8″OD X 18″L

RBS-16: 1/8″ ID X 3/8″ OD X 18″ L

TRIANGLE END NOZZLE

TR-46: 3/8″ ID  x 5/8″ OD x 3″ L
TR-48: 7/16″ ID x 5/8″ OD x 3″ L
TR-49: 1/2″ ID x 5/8″ OD x 3″ L

CONICAL END NOZZLE

BE-35: 1/8″ ID X 3/8″ L

(1/2″ OD X 3″ L)

BE-36: 1/16″ ID X 11/16″ L

(3/8″ OD X 3″ L)

BE-38: 1/8″ ID X 7/8″ L

(5/8″ OD X 3″ L)

STANDARD THREADED PUSH DISK

EP-92: For 2″ barrels

PB-LCSP2: Leather cup spreader
SC-81: Sausage cup only

HFC-81: Floating cup

 

 

LC-2/LC-3/LC-4

LC-2: 2″ leather cup

LC-3: 2.5/8″ leather cup

LC-4: 3.1/2″ leather cup

 

LC-2/LC-3/LC-4

LC-2, Leather cup kit* 2″

LC-3, Leather cup kitr*: 2.5/8″

LC-4, Leather cup kit*3.1/2″

*The kit includes 2 leathers, 3 washers and 1 lock nut.

 

DC-81/DC-82

DC-81:  2″ dual Hytrel® cup

DC-82: 2.5/8″ dual Hytrel® cup

CI-90: Conical ejector

STANDARD POCKET SLIX SPATULAS

A-POCKETSLK

One handle and six sizes of spatulas. The blades can be removed for cleaning. The width of the blades represents a 3″ tapered spatula and a 3″, 4″, 5″, 6″ and 8″ straight spatula. Locking wheel for easy tightening and loosening of blades.

FLEXIBLES POCKET SLIX SPATULAS

A-POCKETSLK-FLE

More flexible than our standard Pocket Slix. One handle and six sizes of spatulas. Blades can be removed for cleaning. The width of the blades represents a 3″ tapered spatula and a 3″, 4″, 5″, 6″ and 8″ straight spatula. Locking wheel for easy tightening and loosening of blades.

SPATULAS POCKET SLIX ELLIPTICAL TIPS

A-POCKETSLK-ELP

With elliptical blades. One handle and six sizes of spatulas. The blades can be removed for cleaning. The width of the blades represents a 3″ tapered spatula and a 3″, 4″, 5″, 6″ and 8″ straight spatula. Locking wheel for easy tightening and loosening of blades.

PLASATIC SET OF SPATULAS         

A set of 8 all plastic spatulas. Both wide and aggressive tips with widths of 3/4″, 7/8″, 1″,1.5″.  4″ long.  Great for glazers or those working on a surface they do not want to scratch.

WIDE SPATULA KIT

A set of 4 wide tip spatulas. 4″ long.  Includes widths of 1″, 1.5″, 2″ and 3″.  Bound together with metal band.

TEFLON® SLICK-1
Comes with a 3″ tapered and 3″, 4″, 5″, 6″, and 8″ straight spatulas.  Equipped with rubber grip and key ring that opens & closes for easy access & storage.
SLICK-2

Comes with a 3″ tapered and 3″, 4″, 5″, 6″, and 8″ straight spatulas. Equipped with key ring that opens & closes for easy access & storage.

KIT-SPT: 

Comes with one of each: 3″ tapered and 3″, 4″, 5″, 6″, & 8″ straight spatulas with wooden handle

KIT-SPT-OF: 

Comes with one of each: 3″, tapered & 3″, 4″, 5″, 6″ & 8″ straight offset spatulas with wooden handle.

STRAIGHT SPATULAS – WOODEN HANDLE

SPT3P: 3″ tapered, 5/8″ – 3/8″ width

SPT3S: 3″ straight, 5/8″ width

SPT4P: 4″  tapered, 5/8″ – 7/16″ width

SPT4S: 4″  straight, 3/4″ width

SPT5P: 5″ tapered, 11/16 – 1/2″ width

SPT5S: 5″ straight, 13/16 width

SPT6S: 6″ straight, 1″ width

SPT8S: 8″ straight, 1.1/4″ width

SPT10S: 10″ straight, 1.1/2″ width

OFFSET SPATULAS – WOODEN HANDLE

SPT3P-OF: 3″ tapered, 5/8″ – 3/8″ width

SPT3S-OF: 3″ straight, 5/8″ – width

SPT4S-OF4″  tapered, 3/4″ width

SPT5S-OF: 5″ straight, 13/16 width

SPT6S-OF: 6″ straight, 1″ width

SPT8S-OF: 8″ straight, 1.1/4″ width

SPT10SF-OF: 10″ straight, 1.1/2″ width

TEFLON® OFFSET SPATULA SET

A set of offset Teflon® spatulas – one of each: 3″ tapered, 3″ straight, 4″ straight, 5″ straight, 6″ straight, and 8″ straight – connected by a metal zip tie.

VIBRATING SEALANT CUTOUT TOOL

PK-VKREPL

  • 6-position variable speed

The vibrating knife cutting kit provides the contractor with everything he needs to carry out simple or complex cutting jobs. This new Rockwell tool uses micro-sonic technology to create a high-frequency oscillating motion that allows for smooth, high-speed cutting and putty removal.
Also available in a kit.

KIT : PK-VKKIT
The kit includes the most popular cutting blades and specially designed inserts that allow the blades to be used on multiple vibrating knife tools. Additional tools include the handy 9-inch cutting knife, 5 unbreakable utility blades and a versatile 20-piece accessory kit.